How to Fix HP Printer Printing Blank Pages
This might be very frustrating when you put a carefully precious document or file and then, hit on the press but, you get the blank sheet from the other door. If you are facing a similar issue on an HP printer so here is the complete guide where you can easily fix the HP Printer Printing Blank Pages issue in a very easy manner. Just follow the below-given instructions.
Why “My Printer Prints Blank Pages”?
There is plenty of reasons why HP printer responds to result as a blank page, such as:
Due to the wrong paper alignment & loaded in the input tray.
Sometimes, ink cartridges or toner have become dislodged from the actual place.
Bad quality ink or toner.
Physical damage of the input tray. Due to the driver’s issue, users face black paper printing problems.
Moreover, if you are getting above-presented similar or other issues & searching for Ways to Resolve Printer Printing Blank Pages So, just follow the instructions:
Ways to Resolve Printer Printing Blank Pages:
Way 1: Turn HP Printer Off and Restart it:
Before starting the resolving ways, users must try to reboot the printer and after restarting the HP printer. If you are getting same issue so just follow the below-given ways to resolve blank pages’ issues. If you are getting blank pages while printing and you have sufficient storage on ink cartridges, that might be the issue of hardware or software. Before starting the troubleshooting steps, you must try to check hardware or software configurations using below-presented instructions:
Way 2: Disconnected Cartridge:
Before doing anything, just check every slot of the cartridges and rectify the issue, if possible so re-install the cartridges, and try a demo printing process.
Way 3: Incorrect Paper Size:
Just, check the alignment of the paper as well as the bunch of white paper that must be fit into the input tray. After then, correct the paper size from the control display panel of the HP printer, go to the ‘Print settings’ then, set the manual size of the paper.
Way 4: Unclog Print Head Nozzles:
Sometimes, due to the dust print head doesn’t respond properly and the blank page printing issue occurred so immediately clean the print head using a soft brush or cotton and sit back properly.
Way 5: Check the ink levels on your printer:
Every HP printer has defined criteria for the ink level to ensure that, the ink/toner level must be full-fill as per the range. If any ink tank is empty so just put the ink as per the color-wise.
Way 5: Re-install the cartridges.
Maximum time, the paper blank printing issue occurred due to defective ink cartridges or their connection.
So, firstly check the connection or if it was possible to replace damaged cartridges and re-install new cartridges.
Restart your printer: This is important to define every above-presented solution and then try to print. I hope it will work fluently.